DOUBLE PEDAL VALVE, FLOOR MOUNTED

Double pedal valve, floor mounted
Inlets on 2-1/2" (64mm) centers
1" (25mm) from floor to center of inlets

B-0502-BT same as B-0502 except with 1/2" British threads
B-2080 - B-0502 valve less hot and cold pedals

Specifications - B-0502
Installation Instructions - 098-002261-45

Model: B-0502

DOUBLE PEDAL VALVE, WALL MOUNTED WITH ANGLE STOPS

Inlets on 2-1/2" (64mm) centers
1" (25mm) from wall to center of  inlets
Wall to pedal tips approx. 13-3/4" (349mm)
Angle loose key stops (B-1350)
Top mounted volume control angle loose key  stop (B-1355)

B-0504-02 same as B-0504-01, but with volume control straight loose key stop (B-0416)

Model: B-0504-01

DOUBLE PEDAL VALVE, LEDGE MOUNTED
Double pedal valve, ledge mounted
Inlets on 2-1/2" (64mm) centers
Rough chrome plated
Specifications - B-0505
Installation Instructions - 098-002261-45

Model: B-0505

SINGLE PEDAL VALVE, FLOOR MOUNTED
Single pedal valve, floor mounted
1" (25mm) floor to center of inlet

Model: B-0507

SINGLE PEDAL VALVE, WALL MOUNTED
Single pedal for hot or cold water
1" (25mm) from wall to center of  inlet
Wall to pedal tip approx. 13-3/4" (349mm)
With straight loose key stop

Model: B-0508

DOUBLE KNEE PEDAL VALVE
Inlets on 2-1/2" (64mm) centers
Approximately 24" floor to base of valve
Pedals 6-1/4" long

Model: B-0509

KNEE ACTION VALVE

• Heavy duty cam acting stirrup
• Valve will remain in set position for hot, cold or  mixed water
• 1/2" IPS female inlets
• 2-1/2" (64mm) centers
• 1/2" IPS female outlet

B-0475-LKS with 1/2" IPS straight loose key stops

Specifications - B-0475
Installation Instructions - 098-003114-45

Model: B-0475

WALL SUPPORT FOR KNEE ACTION VALVE
• All aluminum, fastens to wall and supports valve body of knee action valve
• Approx. 12" (305mm) from wall to valve body mounting holes
• 3-1/4" (83mm) of knee stirrup extends in front of 20" (508mm) back to front basin
• Can be shortened by cutting aluminum pipe
• Available in longer lengths up to 24" as a special order

Model: B-0473

WALL BRACKET FOR KNEE ACTION VALVE
• Cast aluminum
• Approx. 11-1/2" (292mm) wall to front
• For installation where knee action valve cannot be fastened to horizontal sink support bar
• Bracket supports inlet pipes
  

Model: B-0474

FOOT ACTION Bed Pan Washer

• Pedal valve (B-0504-01) with 1/2" IPS female inlets with integral loose key angle stops (B-1350)
• Volume control valve (B-1355) with 3/8" IPS female outlet on pedal valve
• Vacuum breaker (B-0929) with 3/8" IPS inlet and outlet on 3-3/4" (95mm) centers
• Wall hook hose connection with 3/8" IPS flanged inlet
• 5" (1.5m) PVC hose (B-0068-R)

B-0675 Same as B-0676 with self-closing valve (002865-40
Specifications - B-0676
Installation Instructions - 098-003116-45
Installation Instructions - 098-012368-45

Model: B-0676

FOOT ACTION PRE-RINSE UNIT
Model: B-0153
Uses foot pedal valve control (B-0502)

• 1/2" NPSM shank
• 38" (965mm) high
• 15" (381mm) spread
• 7-1/2" (191mm) clearance
• 24" (610mm) riser (000372-40)
• Spray valve (001A) and adapter (000552-25)
• B-0044-H flexible stainless steel hose
• Note: This pre-rinse unit requires separate check valves.

Piping between remote control valve and pre-rinse supplied by others.
Check Valves for B-0153
B-CVH1-2 for horizontal or vertical use, 1/2" NPT female
B-CVH3-4 for horizontal or vertical use, 3/4" NPT female
Furnished in rough brass

Model: B-0153